TL;DR. These are two different machines. Delay Camera shows you a live feed running 1 to 300 seconds behind, so you finish a rep, turn around, and watch it play by itself. ReplayR shows you nothing until you ask: it keeps a rolling buffer and writes a clip when you tap, press your watch, or hold up a palm. Delay wins for a fixed drill station where the athlete turns and looks. Buffer wins for a session where you keep the good moments and throw the rest away.
Feature matrix
Feature
ReplayR
Delay Camera
Model
Rolling buffer, saved on trigger
Delayed live feed, plays automatically
Lookback range
45 s or 90 s free, 3/6/12 min Pro
1–300 s delay
Needs a trigger
Yes, that is the point
No, the feed just runs behind
Save from a smartwatch
Yes, Wear OS app, Tile and Complication
No
Hand-gesture save
Yes, open palm (Pro)
No
Slow motion
Playback down to 0.25×
1/2× and 1/10×
Still capture
No
Yes
Saved output
MP4, trimmed, after a keep/toss pass
MP4 export from the delayed feed
Screen must be visible
No, stealth mode blacks it out
Yes, the screen is the product
Pricing
Free + one-time $5.49 Pro unlock
Free, with in-app purchase
Platforms
Android + Wear OS (iOS in progress)
Android
Delay Camera figures from its Google Play listing (package com.kohshin.delaycamera, developer onsight, version 2.51, updated 22 July 2026, 50,000+ installs, 4 GB RAM recommended). Last verified 2026-07-28.
Delayed mirror versus replay on demand
A delayed mirror is a loop with a lag. Point the phone at the bay, set 8 seconds, hit a golf ball, turn around, and the swing plays on screen without anyone touching anything. Nobody presses a button, nobody misses a rep, and the feedback arrives inside the window where the athlete still remembers the feel.
A rolling buffer keeps the last N seconds in memory and discards the rest. Nothing plays until you say so, and only the moments you save reach the disk. That fits a match, a sparring round, or a two-hour practice where 95 percent of the footage is worth nothing.
The failure modes are opposite. A delayed mirror needs the athlete to turn and look, and it needs a screen they can see, which rules out bright sun and any distance past a few metres. A buffer needs someone to trigger it, which is exactly why ReplayR puts the trigger on a watch and on a palm gesture.
Where each one earns its place
Delay Camera is a good drill-station app. It is free, it has been maintained (version 2.51 shipped in July 2026), the delay range of 1 to 300 seconds covers everything from a golf swing to a full gymnastics routine, and 1/10× slow motion is slower than what ReplayR offers on playback. If your setup is a phone on a stand two metres from a lifter, that is a solid choice.
ReplayR is a session app. The buffer runs while you coach, saves happen from the touchline or the mat edge, and the swipe pass at the end leaves you with a folder of keepers rather than a delayed feed you never captured. Stealth mode blacks the screen out so the phone can buffer for two hours without cooking its battery.
Run both if the room allows
They cost nothing to combine. Put an old phone on a stand as a delayed mirror for the athlete to self-correct, and keep your own phone or a second device on ReplayR to capture the reps worth keeping and reviewing later. The mirror handles the immediate feel, the buffer handles the record.
If you only want one, the question is simple: does the athlete turn around and look at a screen, or do you want a folder of clips at the end? The first is a mirror, the second is a buffer.
Pick ReplayR if…
You want saved clips at the end of a session, not a live feed during it.
The phone is mounted far away, and you save from a watch or with a palm.
You film outdoors where an on-screen mirror is unreadable.
You want to trim and triage before anything hits your gallery.
You buffer for hours and need stealth mode to protect the battery.
Pick Delay Camera if…
You run a fixed drill station and the athlete turns to look at the screen.
You want automatic feedback after every rep with no trigger at all.
You need 1/10× slow motion on the spot.
You want stills as well as video.
A delay under 300 seconds covers everything you review.
FAQ
What is the difference between a delay camera and a rolling buffer?
A delay camera shows a live feed running a set number of seconds behind, so a rep plays back automatically once you turn around. A rolling buffer keeps the last N seconds in memory and only writes a file when you trigger a save. Delay is for self-correction at a station; a buffer is for keeping the moments worth keeping across a whole session.
Is Delay Camera -Auto Replay- free?
Yes, with an in-app purchase. It is on version 2.51 as of 22 July 2026, has 50,000+ installs, and the developer recommends at least 4 GB of RAM. ReplayR is free with a one-time $5.49 Pro unlock.
Can ReplayR act as a delayed mirror?
Not as a continuous feed. ReplayR saves on a trigger and then plays the clip back. If your athletes rely on turning around to a screen after every rep, a dedicated delay app fits better, and the two run happily on separate devices.
Which is better for gym form checks?
For a squat rack with the phone two metres away, a delayed mirror is hard to beat. For a session where you want the working sets saved and reviewed later, ReplayR with a 12 to 15 second clip and a watch save is the cleaner fit.