ReplayR icon
ReplayR
Instant replay camera for coaches
Google Play iOS coming soon
Comparison · Updated

ReplayR vs ClipBack

By

TL;DR. ClipBack is the closest thing on Google Play to ReplayR in philosophy: a buffer runs, you tap after the moment, the clip lands in your gallery. The differences are reach and length. ClipBack saves the last 10, 20, or 30 seconds, 45 with Pro, and triggers from the screen, a Bluetooth remote, or the volume buttons. ReplayR runs 45 seconds to 12 minutes and triggers from a Wear OS watch or an open palm, then makes you swipe through the session before anything reaches your camera roll.

Feature matrix

FeatureReplayRClipBack
Rolling buffer length45 s or 90 s free, 3/6/12 min Pro10/20/30 s free, up to 45 s Pro
Save triggerScreen, Wear OS watch, open-palm gesture (Pro)Screen, Bluetooth remote, volume buttons
Smartwatch companionYes, Wear OS app, Tile and ComplicationNo
Hand-gesture saveYes, open palm (Pro)No
Free-tier qualityUp to 480p1080p
Max qualityUp to 8K with Pro (device max)4K at 60 fps with Pro
Slow motionPlayback down to 0.25×Slow and fast motion export (Pro)
Review before savingYes, swipe keep/toss, bin with 24 h recoveryNo, auto-trimmed clips go to the gallery
Stills while bufferingNoYes (Pro)
PricingFree + one-time $5.49 Pro unlockFree tier + Pro with a 30-day trial

ClipBack figures from its Google Play listing (package app.clipback). Check the listing for its current Pro price, it is not published outside the store. Last verified 2026-07-28.

Same idea, different range

Both apps exist because the record button is always pressed too late. Neither asks you to predict the moment. Where they part company is how far back the tape reaches.

ClipBack covers 30 seconds free and 45 with Pro, which fits a shot, a lift, a trick, a single point. ReplayR covers 45 or 90 seconds free and 3, 6, or 12 minutes with Pro, which fits a rally plus the serve that set it up, a full BJJ round, a gymnastics routine, or an entire over. When a coach says "go back to the phase before that", a 45 second ceiling cannot answer.

Bluetooth remote versus watch and palm

ClipBack deserves credit for taking the trigger problem seriously: it accepts a Bluetooth remote and the volume buttons, so the phone can be mounted while you hold a cheap shutter clicker. That works, and it costs a few dollars of hardware.

ReplayR puts the trigger on hardware you already wear. The Wear OS app saves, pauses, starts and ends the session, and changes clip length, and the Tile and Complication put a one-tap save on the watch face itself. When both hands are busy, the open-palm gesture on Pro saves without touching anything at all. One fewer object to carry, charge, and lose.

What happens after the tap

ClipBack auto-trims and writes straight to Google Photos or the device gallery. Fast, and fine when you save three clips a session.

ReplayR stages clips instead. At the end you swipe right to keep and left to toss, trim the keepers, and only then does anything land in your gallery. Tossed clips sit in a bin for 24 hours in case you were wrong. After a two-hour session with 40 saves, that triage step is the difference between a usable folder and a camera roll you will never open again.

Pick ReplayR if…

  • Your sport needs more than 45 seconds of lookback.
  • You want the save on your wrist rather than on a Bluetooth clicker.
  • You save often and want to triage the session before clips hit your gallery.
  • You film in the dark or want stealth mode to save battery.
  • You prefer paying once over a trial that converts to a recurring charge.

Pick ClipBack if…

  • Your clips are short and 30 to 45 seconds is genuinely enough.
  • You want 1080p capture without paying.
  • You already own a Bluetooth shutter remote and no smartwatch.
  • You want stills while the buffer keeps running.
  • You want clips in Google Photos the second you tap, with no review step.

FAQ

Is ClipBack the same as ReplayR?

The core idea is the same: a rolling buffer, saved after the fact. The differences are buffer length (30 to 45 seconds versus 45 seconds to 12 minutes), the save trigger (Bluetooth remote and volume buttons versus Wear OS watch and open-palm gesture), and what happens next (straight to the gallery versus a swipe review pass with a 24 hour bin).

Does ClipBack have a Wear OS app?

No. As of July 2026 ClipBack triggers from the screen, a Bluetooth remote, or the volume buttons. ReplayR ships a full Wear OS companion that can save, pause, start and end sessions, and change clip length, with a Tile and a Complication for one-tap saving from the watch face.

Which has better free video quality?

ClipBack. Its free tier records 1080p while ReplayR free caps at 480p and puts 720p through 8K behind the one-time Pro unlock. ReplayR free spends its budget on buffer length, the watch companion, and the review flow instead.

Can I run both?

You can, but there is little reason to. They solve the same problem with the same mechanism. Pick on buffer length and how you want to trigger the save.

Related

Try ReplayR free.

One-time Pro unlock if you want longer buffers, hand-gesture save, and 8K capture. No subscription.